The XTY-960 Kelan brush wheel is used in the entry zone of Kelan-type stenter frames. The same wheel body can be fitted with plastic filament or hog bristles, and the bristle material is the main selection parameter. Plastic filament has higher stiffness, good wear resistance and low moisture absorption, and suits high-output operation and coarse, thick fabrics. Hog bristle has gentle elasticity and has less effect on the surface of fine, dense or light fabrics. Bristles that are too soft or too short leave the selvedge insufficiently dressed and curling may occur, whereas bristles that are too hard may leave brush marks on the fabric surface. Specifications are subject to the physical part.
1. Dual material on one wheel: the same wheel body can carry plastic filament or hog bristles.
2. Plastic filament characteristics: higher stiffness, wear resistance and low moisture absorption.
3. Hog bristle characteristics: gentle elasticity, suited to fine, dense and light fabrics.
4. Effect of bristle hardness: soft or short bristles may allow curling, while hard bristles may leave brush marks.
5. Kelan machine matching: used in the entry zone of this type of stenter frame.
6. Material stocking: both bristle types can be held where many fabric types are processed.
7. Customization: OEM/ODM can be determined through communication.
|
Model: |
XTY-960 |
|
Applicable machine: |
Kelan-type stenter |
|
Size: |
Small |
|
Material: |
Plastic / hog bristle |
|
Applicable equipment: |
Stenter entry area |
|
Function: |
Opens selvedges and guides fabric into clips |