Home / Product / Stenter Machine Parts / Small Equipment & Accessories / XTY-9200 Monforts passive brush device (pneumatic cylinder)
  • XTY-9200 Monforts passive brush device (pneumatic cylinder)
  • XTY-9200 Monforts passive brush device (pneumatic cylinder)

XTY-9200 Monforts passive brush device (pneumatic cylinder)

The XTY-9200 Monforts passive brush device (pneumatic cylinder) is intended for the feed end of Monforts stenter frames and is installed ahead of the point where the selvedge is pinned or clipped. The brush presses against the fabric surface and guides the edge into the pin plate or clip. The device consists of a brush body, a bracket and a pneumatic cylinder. When the piston rod extends, the brush lowers onto the fabric, and when it retracts, the brush lifts clear of the surface. The term passive means that the brush body has no drive motor and is turned by friction from the moving fabric, so its surface speed equals the machine speed and no separate speed setting is needed. Contact pressure is determined by the cylinder air pressure, with lower pressure for light fabrics and higher pressure for thick fabrics, and excessive pressure may leave brush marks. The brush is lifted by the cylinder when threading the fabric or changing articles. Brush size and cylinder connection are subject to the machine model and the physical part.

Send Inquiry
  • 01.Product Advantages
  • 02.Product Parameters
  • 03.Inquire Now

1. Cylinder lifting mechanism: piston rod movement lowers the brush onto the fabric or lifts it clear.
2. No drive motor: the brush body is turned by fabric friction and its speed follows the machine speed automatically.
3. Pressure set by air supply: the appropriate air pressure is used for fabrics of different thickness, reducing the risk of brush marks.
4. Convenient threading: the whole brush can be raised out of the fabric path when changing articles or leading in fabric.
5. Model correspondence: suited to the edge positioning point at the feed end of Monforts stenter frames.
6. Simple structure: the combination of brush body, bracket and cylinder is easy to inspect, and the brush element can be replaced.
7. Customization scope: brush specification and cylinder connection can be adjusted as OEM/ODM work, with the content confirmed by both parties.

Model:

XTY-9200

Type:

Passive brush device (pneumatic cylinder)

Applicable machine:

Monforts-type stenter

Process:

Edge pressing at entry