Home / Product / Stenter Machine Parts / Small Equipment & Accessories / XTY-9200 Depinning device (wheel type, left)
  • XTY-9200 Depinning device (wheel type, left)

XTY-9200 Depinning device (wheel type, left)

The XTY-9200 depinning device (wheel type, left) is used at the delivery end of a pin-type stenter frame to separate the fabric from the needle tips of the pin plate. Its working principle is that the curved surface of a rotating wheel contacts the fabric edge, lifts it from the pin tips and pushes it outward, so that the fabric comes off along the pin shaft instead of being pulled directly, which avoids enlarged pin holes and ragged edges. The wheel body turns passively with the travel of the fabric and pin plate, and the gap between the wheel surface and the pin tips is set appropriately. A gap that is too large cannot lift the edge, while one that is too small may allow the wheel to touch the pins. If elongated pin holes, curling or creases appear at the edge after delivery, the wheel rotation and the position setting are inspected. The device is used only on the left side of pin plate equipment, and a corresponding right-hand part is supplied separately. Mounting dimensions and wheel material are subject to the physical part.

Send Inquiry
  • 01.Product Advantages
  • 02.Product Parameters
  • 03.Inquire Now

1. Wheel-assisted depinning: the rotating wheel lifts the edge from the pin tips and pushes it off, in place of direct pulling.
2. Curved contact surface: the smooth contact reduces pin hole enlargement and keeps the edge of thin fabric tidy.
3. Passive follow-up rotation: the wheel turns with the pin plate and fabric direction, so delivery is continuous.
4. Settable gap: the distance between wheel surface and pin tips is adjustable to balance lifting effect and pin clearance.
5. Scope of application: dedicated to the left delivery end of pin-type stenter frames.
6. Basis for troubleshooting: abnormal edges after delivery can be traced item by item through wheel condition and position.
7. Customization: OEM/ODM work can be carried out from surveyed parts or drawings, with terms fixed after negotiation.

Model:

XTY-9200

Type:

Depinning device (wheel type)

Position:

Left

Applicable machine:

Pin-plate stenter

Process:

Depinning at delivery