The XTY-9200 single-wheel support device (left) is used mainly at stenter frame positions where installation space is limited and the fabric weight is moderate or light. The device has one support wheel located under the fabric edge before and after the left needle plate or clip chain, and the edge passes over the wheel surface, which carries it and prevents sagging between the gripping points. The single wheel structure is small and light with low rotational inertia, so resistance to the passing edge is small. Its contact area is narrow, and its support capacity for heavy fabrics is limited, so such fabrics call for the double-wheel model. In operation, the freedom of rotation of the wheel, fiber winding on the shaft and uneven wear are monitored. The device is for the left side only, and a separate paired part is used on the right. Hole positions and specifications are subject to the machine and the physical part.
1. Single-wheel support: one wheel carries the edge and prevents sagging between the gripping points.
2. Low-inertia rotation: the light wheel body gives small resistance to the passing edge.
3. Small footprint: takes up little space and suits positions with restricted room.
4. Fabric correspondence: suitable for fabrics of moderate and light unit weight, while heavy fabrics call for the double-wheel type.
5. Shaft inspection: wheel freedom, fiber winding and uneven wear can be confirmed during routine checks.
6. Left-hand specific, with the paired right-hand part selected separately.
7. OEM/ODM: hole positions and wheel diameter can be customized from used-part dimensions or drawings, with details subject to negotiation.
|
Model: |
XTY-9200 |
|
Type: |
Single-wheel support device |
|
Position: |
Left |
|
Applicable machine: |
Stenter / tenter frame |
|
Process: |
Selvedge under-support |