Home / Product / Stenter Machine Parts / Small Equipment & Accessories / XTY-9200 Adjustable toothed-plate support wheel device with blow pipe (left)
  • XTY-9200 Adjustable toothed-plate support wheel device with blow pipe (left)
  • XTY-9200 Adjustable toothed-plate support wheel device with blow pipe (left)
  • XTY-9200 Adjustable toothed-plate support wheel device with blow pipe (left)

XTY-9200 Adjustable toothed-plate support wheel device with blow pipe (left)

The XTY-9200 adjustable toothed-plate support wheel device with blow pipe (left) is intended for the left needle plate zone of a stenter frame. It is installed below the needle plate and consists of a toothed support plate, a support wheel mechanism, a position adjustment structure and a blow pipe. During installation the mounting height of the plate is first determined from the position of the needle plate, and its vertical and longitudinal position is then adjusted to the fabric width and thickness. Because the toothed plate is adjustable, one device covers support requirements of different fabric types. The blow pipe is arranged close to the wheel to remove lint and size powder accumulated on the support surface and to assist edge conformity. The device is for the left side only, and the right side requires a paired part. Mounting hole spacing, blow pipe connection size and material are subject to the physical part or drawing and are verified against the used part.

Send Inquiry
  • 01.Product Advantages
  • 02.Product Parameters
  • 03.Inquire Now

1. Toothed plate support: the toothed plate carries the sagging edge and lowers the possibility of the edge leaving the needle plate.
2. Multi-directional adjustment: vertical and longitudinal positions are adjustable to suit different fabric widths and weights.
3. Blow pipe arrangement: located near the wheel to remove lint and size powder from the support surface.
4. Multi-article use on one machine: support conditions are changed by repositioning the plate without replacing the whole unit.
5. Left needle plate specific, with a separate paired part for the right side.
6. Interface verification: hole spacing and blow pipe connection are confirmed against the used part or drawing.
7. Customization service: non-standard OEM/ODM design is supported, with specifications and delivery terms subject to contract.

Model:

XTY-9200

Type:

Adjustable toothed-plate support wheel device with air blow pipe

Position:

Left

Applicable machine:

Stenter / tenter frame

Process:

Selvedge under-support