• Die head side plate gasket
  • Die head side plate gasket

Die head side plate gasket

The die head side plate sealing gasket is a sealing element installed at the joint between the side plate and the body of the die head, and it prevents leakage of high-temperature melt at this joint. During film extrusion the melt inside the die is under high temperature and pressure, and the side plate joint is a potential leakage position, so the gasket must retain its sealing performance at operating temperature and melt pressure. The gasket is a replaceable wearing part and is normally fitted anew after the die head has been disassembled, cleaned or its side plates adjusted. Material, thickness and outline dimensions are determined by the physical part or drawing and must be consistent with the die model and side plate structure. The product is applicable to die head maintenance and spare part provision on film extrusion lines of various types.

Send Inquiry
  • 01.Product Advantages
  • 02.Product Parameters
  • 03.Inquire Now

1. Melt sealing: used at the side plate joint of the die head to prevent leakage of high-temperature melt.
2. Temperature and pressure resistance: sealing performance must be kept at operating temperature and melt pressure, with material defined by drawing.
3. Structural matching: outline and thickness are consistent with the die model and side plate structure.
4. Replaceability: as a wearing part, it can be replaced after the die head is disassembled or cleaned.
5. Spare part provision: suitable for stocking as a maintenance spare for extrusion line die heads.
6. Custom service: manufacture from drawings or used gaskets is offered, with material and dimensions subject to confirmed results.

Name:

Die head side plate gasket

Use:

Melt side-leak prevention