The XTY-170 type Ⅱ clip belongs to the K44B mercerizing machine series and is the second specification of that series. Clips of different specifications within one mercerizing series have similar outlines but small differences in the jaw or mounting section, so the old clip is compared with the new part at replacement, and the jaw shape, the hinge hole position and the overall length are verified, installation proceeding only when all three agree. Whether a clip has reached the end of its life can be judged by a gripping test: a narrow strip of fabric is clamped and pulled outward, and slipping indicates insufficient jaw pressure or a worn jaw. The part is used on the chain of the mercerizing machine to hold both selvedges of the fabric and is intended for K44B mercerizing machines; material and dimensions are subject to the physical part or drawing.
1. Second specification: type Ⅱ corresponds to the second clip model within the K44B series.
2. Three-point verification: jaw shape, hinge hole position and overall length.
3. Gripping test: clamping and pulling a fabric strip checks jaw pressure and wear condition.
4. Gripping position: used to hold both selvedges on the mercerizing machine chain.
5. Machine correspondence: suitable for K44B mercerizing machines.
6. Custom service: OEM/ODM is provided, with specification differences determined from measurement of the old part.
|
Model: |
XTY-170 Type-Ⅱ |
|
Series: |
XTY-170 (K44B type) mercerizing machine |
|
Type: |
Clip |
|
Process: |
Mercerizing |
|
Applicable machine: |
Mercerizing machine / stenter |