• Artos Chain Link Holder

Artos Chain Link Holder

The chain base is applied to Artos-type stenter frames and is installed between the chain and the gripping elements. One side is connected to the chain link, and the other side carries the tenter clip or pin plate holder. Its hole positions, thickness and pitch must coordinate with the adjacent chain links and gripping elements so that the spacing and height of all gripping points remain uniform. In operation, the chain base bears the outward fabric tension and the impact load generated as the chain advances link by link. Wear of the base or deformation of the holes results in height deviation and spacing changes of the gripping elements. Chain bases are arranged in pairs for the chains on both sides of the machine. The mounting hole spacing and thickness should be verified during selection, and the specifications are subject to the physical part or drawing.

Send Inquiry
  • 01.Product Advantages
  • 02.Product Parameters
  • 03.Inquire Now

1. Matching relationship: hole positions and thickness coordinate with adjacent links and gripping elements to keep the gripping-point spacing uniform.
2. Load performance: the base bears fabric tension and chain impact load at the same time.
3. Wear characteristics: wear of the base or deformation of the holes causes height deviation of the gripping elements and is to be checked during inspection.
4. Arrangement: bases are configured in pairs for the chains on both sides, with equal quantities on the left and right.
5. Applicable machines: the base is used for mounting chains and gripping elements on Artos-type machines.
6. Customization: OEM/ODM processing based on samples or drawings is available, with specific conditions to be negotiated separately.

Name:

Chain base

Applicable machine:

Artos-type stenter

Process:

Stentering, drying, heat setting