Home / Product / Stenter Machine Parts / XTY-20 Artos Stenter Machine Parts / Artos Left-Hand Pin Plate (Plated)
  • Artos Left-Hand Pin Plate (Plated)

Artos Left-Hand Pin Plate (Plated)

The Artos left-hand pin plate (plated) is applied to Artos-type stenter frames and is mounted on the pin plate holders of the left-side chain. It is arranged on one side opposite the right pin plate, the installation directions differ, and the two are not interchangeable. Fixing pins are arranged on the plate surface, and during tentering the pin tips penetrate the selvedge so that the fabric is stretched and held in the width direction, which suits thin, elastic or slippery fabrics that are not convenient to grip with clips. The surface is electroplated, and the plating layer improves rust resistance and wear resistance. The left and right configuration should be distinguished in selection, and the plate length, hole spacing and pin pitch should be verified. The specifications are subject to the physical part or drawing.

Send Inquiry
  • 01.Product Advantages
  • 02.Product Parameters
  • 03.Inquire Now

1. Left/right configuration: the plate is dedicated to the left side of the machine, and its installation direction differs from that of the right pin plate.
2. Pin fixing: pin tips penetrate the selvedge, which suits thin and elastic fabrics that are not convenient to grip with clips.
3. Surface treatment: the electroplated layer improves rust resistance and wear resistance.
4. Installation position: the plate is mounted on the pin plate holders of the left chain, and the hole spacing must correspond to the holders.
5. Selection check: the plate length, hole spacing and pin pitch are subject to the physical part or drawing.
6. Customization: plate length, pin pitch and other features can be discussed for OEM/ODM according to drawings, with conditions subject to negotiation.

Name:

Pin plate, left side

Applicable machine:

Artos-type stenter

Position:

Left side

Finish:

Plated

Process:

Stentering, drying, heat setting