This inner bush is of the oil-free ball type and is used at the hinge points of Artos chains. It is inserted into the link hole and fitted with the pin. Balls are provided inside the bush, so that part of the relatⅣe motion between the pin and the hole wall changes from sliding to rolling, which lowers friction resistance. The oil-free form does not depend on lubricating oil and avoids oil evaporation, coking and fabric contamination under the high temperature in the heat-setting chamber. The bush is a wearing fitting component, and wear occurs on the bush body rather than on the link itself, so it can be replaced separately. The structure differs from that of the oil-free sleeve-type bush, and the inner diameter, outer diameter and length should be verified during selection. The specifications are subject to the physical part or drawing.
1. Rolling structure: balls inside the bush convert part of the sliding between pin and hole wall into rolling, lowering friction resistance.
2. Oil-free operation: no lubricating oil is required, which avoids oil coking at high temperature and oil contamination of the fabric.
3. Wear transfer: wear is concentrated on the bush body, the link body is retained, and the bush can be replaced separately.
4. Type distinction: the structure differs from the oil-free sleeve-type bush, so the type should be verified in selection.
5. Dimension check items: the inner diameter, outer diameter and length are subject to the physical part or drawing.
6. Customization: OEM/ODM can be undertaken based on samples or drawings, with terms subject to negotiation.
|
Name: |
Oil-free ball inner bush |
|
Applicable machine: |
Artos-type stenter |
|
Structure: |
Oil-free, ball type |
|
Process: |
Stentering, drying, heat setting |