The ARTOS single-purpose D aluminum pin clip is used on Artos-type stenter frames to grip the fabric selvedge from the entry point to the delⅣery point, so that the fabric is stretched evenly in the width direction and held at the specified width. The body is made of aluminum and has a D-shaped profile. The single-purpose structure provides gripping only and has no pin function, which suits fabrics that can be held directly by the clip jaw. The clip is mounted on the chain, travels along the guide rail through the hot-air zone, keeps the jaw closed under high-temperature conditions and opens at the delⅣery position to release the selvedge. The low density of aluminum reduces the load on the chain and rail when clips are installed in a continuous row. The jaw dimensions and mounting method are subject to the physical part or drawing.
1. Gripping function: the single-purpose structure is dedicated to selvedge holding, and the closed jaw maintains the selvedge position continuously.
2. Lightweight body: the aluminum body has low mass, which reduces the load on the chain and rail when clips run in a row.
3. Simple structure: no pin components are fitted, so the number of parts and dust-collecting areas is small.
4. Operating conditions: the clip is suitable for continuous operation in hot-air ovens.
5. Compatibility: the clip corresponds to Artos-type machines, and the body profile and mounting dimensions should be verified during selection.
6. Customization: OEM/ODM production according to drawings or samples is available, with specific terms subject to negotiation.
|
Model: |
D-type single-purpose |
|
Applicable machine: |
Artos-type stenter |
|
Material: |
Aluminum |
|
Surface treatment: |
Anodized |
|
Process: |
Stentering, drying, heat setting |