Home / Product / Stenter Machine Parts / XTY-20 Artos Stenter Machine Parts / Flat-Head RⅣet (Drilled) φ4×10
  • Flat-Head RⅣet (Drilled) φ4×10

Flat-Head RⅣet (Drilled) φ4×10

This rⅣet has a flat head and a hollow (drilled) shank. Its specification is a shank diameter of 4 mm and a shank length of 10 mm, and it is used for rⅣeted connections in chain parts, tenter clip components and pin plate related structures of stenter frames. The hollow shank allows the tail to be flared outward during rⅣeting, so that a smaller impact force is required, and the low exposed height of the flat head reduces the possibility of scraping against the fabric or guide rail. The 10 mm shank length suits joints with a larger total clamped thickness, and the shank length should match the total thickness of the connected parts when the rⅣet is selected. The material is subject to the physical part.

Send Inquiry
  • 01.Product Advantages
  • 02.Product Parameters
  • 03.Inquire Now

1. Hollow shank: the tail is easily flared and formed, and the impact force required for rⅣeting is small.
2. Flat head: the low exposed height reduces the possibility of scraping against the fabric or guide rail.
3. Specification marking: φ4×10 denotes a shank diameter of 4 mm and a shank length of 10 mm.
4. Length selection: the shank length should match the total thickness of the connected parts, and 10 mm suits joints with a larger total thickness.
5. Range of use: rⅣeting of chain parts, tenter clip components and pin plate related structures.
6. Customization: shank diameter, length and head type can be discussed for OEM/ODM according to drawings, with details subject to negotiation.

Name:

Flat-head hollow rⅣet

Applicable machine:

Artos-type stenter parts

Size:

φ4×10