Home / Product / Stenter Machine Parts / XTY-30 Monforts Stenter Machine Parts / Monforts 030XZ middle guide rail, 1M, left
  • Monforts 030XZ middle guide rail, 1M, left

Monforts 030XZ middle guide rail, 1M, left

The 030XZ Middle Guide Rail (1 m, left) is intended for Monforts 030XZ stenter frames and is installed in the middle section of the left-hand chain track inside the oven. Each section is 1 m long and is connected end to end with adjacent sections through joints to form the straight running track of the clip chain. The left-hand and right-hand versions are structurally symmetrical and are not interchangeable. The rail surface supports and guides the chain so that the clips follow the specified path, which keeps the selvedge gripping position and fabric width stable. Middle sections are numerous and are continuously subjected to chain friction and oven heat, so periodic inspection of straightness, surface wear and end deformation is required. Dimensions and material are subject to the physical part or drawing.

Send Inquiry
  • 01.Product Advantages
  • 02.Product Parameters
  • 03.Inquire Now

1. Compatibility: corresponds to Monforts 030XZ equipment and is used at the middle position of the left-hand track.
2. Left and right configuration: a left-hand specific structure arranged symmetrically with the right-hand rail, to be distinguished by machine side during installation.
3. Guiding performance: the straight rail surface provides continuous support for the chain and keeps the clip travel path consistent.
4. Modular connection: each 1 m section is joined end to end through joints, allowing assembly to the oven length.
5. Wear part characteristics: straightness and wear condition can be assessed by periodic measurement, and deformed sections can be replaced indⅣidually.
6. Customization: OEM/ODM production according to drawings or samples is available, with specific conditions subject to negotiation.

Model:

030X

Part:

Middle guide rail

Length:

1M

Position:

Left

Series/Applicable machine:

Monforts-type stenter

Process:

Stentering, drying, heat setting