797 is the specification code of this pin plate, and other codes such as 774 exist in the same series, with differences in needle position or structure, so the code, the measured length and the mounting hole spacing are stated together when ordering. The Monforts 797 pin plate (plated) has an electroplated surface and is mounted on the pin holders of Monforts-type tenter frames, entering the oven with the chain and holding the width by needles piercing the selvedge, mainly for knitted fabrics and fabrics requiring needle fixing. The electroplated layer improves the corrosion resistance of the plate body in the hot, humid and chemical-laden workshop environment. Pin plates are wearing parts, and routine inspection items are lint accumulation between needles, bent or broken needles and extensⅣe coating loss; a new plate is fitted when these occur, and keeping a suitable stock of spares is appropriate. Base material and dimensions are subject to the actual part.
1. Specification code: 797 is a specification code that differs from codes such as 774 in needle position or structure.
2. Mounting and running: fitted on the pin holders and entering the oven with the chain, where needle piercing holds the selvedge and width.
3. Coating protection: the electroplated layer improves corrosion resistance in hot, humid and chemical-laden environments.
4. Application scope: mainly for knitted fabrics and fabrics requiring needle fixing.
5. Spare parts reserve: pin plates are wearing parts, and a suitable stock allows timely replacement.
6. Inspection items: lint accumulation between needles, bent needles, broken needles and coating loss are the main contents.
7. Customization: OEM/ODM according to drawings or samples can be carried out, with conditions subject to agreement.
|
Model: |
797 |
|
Name: |
797 pin plate, plated |
|
Applicable machine: |
Monforts-type stenter |
|
Surface treatment: |
Plated |
|
Process: |
Pin-type stentering |