The XTY-030 double plastic bushing chain link is a single-link chain component for Monforts-type tenter frames and is used for single-link replacement when local wear occurs in a chain. The link consists of link plates, a pin and two layers of plastic bushing; the bushings are located between the pin and the plate bores, so that relatⅣe friction in rotation is borne by the plastic layers and direct metal-to-metal contact is avoided, which results in low running noise and a reduced possibility of seizure. A chain is formed by several hundred links connected in series, and the whole chain does not need to be replaced when indⅣidual links wear. Judgement items include local tightness, jumping, abnormal noise and pitch elongation. Adjacent links in the same section are preferably replaced together, and the pitch of new and old links is to be consistent to avoid uneven clip spacing. Specific dimensions are subject to the actual part.
1. Composition: link plates, a pin and two layers of plastic bushing are combined, with the bushings located between the pin and the plate bores.
2. Material and friction pair: the plastic bushings bear the rotational friction and avoid direct metal contact.
3. Running characteristic: running noise is low and the possibility of seizure between pin and plate is reduced.
4. Single-link replacement: applicable to replacement of one link after local wear, without replacing the whole chain.
5. Pitch consistency: the pitch of new and old links is to be consistent, and adjacent links are preferably replaced together.
6. Condition judgement: local tightness, jumping, abnormal noise and pitch elongation are the main inspection items.
7. Customization: OEM/ODM based on drawings or samples can be carried out, with terms subject to agreement.
|
Model: |
XTY-030 |
|
Name: |
Double-plastic inner-bushing chain link |
|
Applicable machine: |
Monforts-type stenter |
|
Applicable machine: |
Stenter / tenter frame |
|
Process: |
Stentering, drying, heat setting |