The XTY-040 Type Ⅱ single-purpose D aluminum pin clip is a wearing spare part for Bruckner Type Ⅱ stenter frames. The clip body is made of aluminum and provides gripping only. In operation the jaw closes on the selvedge and bears the reverse tension generated by fabric shrinkage, so the jaw edge, pivot pin and return spring are the main wear locations. Inspection items include gripping force, smoothness of opening and closing, pivot pin clearance and deformation of the body. Clips with insufficient gripping force or sluggish action should be replaced as complete units, and replacement in batches along the same chain is preferable so that the gripping condition remains uniform. The Type Ⅱ clip differs in structure from the conventional type, and dimensions are subject to the physical part or drawing.
1. Single-purpose gripping structure: only selvedge gripping is performed, so the component composition is clear and inspection items are well defined.
2. Type Ⅱ structure: differs from the conventional clip and corresponds to Type Ⅱ Bruckner equipment.
3. Aluminum clip body: the moving mass is low, which reduces the reciprocating load on the chain.
4. Wear part management: gripping force, pivot pin clearance and body deformation can serve as replacement criteria.
5. Suitability for batch replacement: clips of identical specification allow a whole chain to be renewed in batches, so the gripping condition becomes uniform.
6. Custom supply: OEM/ODM processing based on used parts is available, with technical parameters subject to written confirmation by both parties.
|
Model: |
XTY-040Ⅱ |
|
Series: |
XTY-040 Type Ⅱ clip series |
|
Type: |
Single-purpose D type |
|
Material: |
Aluminum |
|
Surface treatment: |
Anodized |
|
Applicable machine: |
Bruckner Type Ⅱ stenter |
|
Process: |
Stentering, drying, heat setting |