Home / Product / Stenter Machine Parts / XTY-540 Krantz Stenter Machine Parts / Krantz lubricating board 5*15*598mm/5*20*598mm/5*40*598mm
  • Krantz lubricating board 5*15*598mm/5*20*598mm/5*40*598mm

Krantz lubricating board 5*15*598mm/5*20*598mm/5*40*598mm

The Krantz lubricating board belongs to the XTY-540 series and is used in the chain guide rail of Krantz vertical stenter frames. It is installed between the chain and the rail, where it reduces friction, guides the chain and protects the rail, lowering both sliding resistance and running noise. The listed specifications are 5 mm in thickness and 598 mm in length, with three widths of 15 mm, 20 mm and 40 mm, which correspond to different rail slot widths and installation positions and are coded 5*15*598, 5*20*598 and 5*40*598. During selection, the specification is determined from the measured width of the rail slot. The board fits into the rail channel and is replaced as a whole once the wear limit is reached, which prevents direct metal contact between chain and rail. Material is subject to the physical part or drawing.

Send Inquiry
  • 01.Product Advantages
  • 02.Product Parameters
  • 03.Inquire Now

1. Friction reduction and guidance: forms a sliding surface between chain and rail and also constrains the chain travel path.
2. Three width specifications: 15 mm, 20 mm and 40 mm cover different slot widths.
3. Uniform thickness and length: 5 mm thick and 598 mm long, convenient for configuration by section.
4. Rail protection: wear is concentrated on the board, so the rail body is preserved.
5. Series support: part of the XTY-540 series for Krantz vertical models.
6. Custom dimensions: OEM/ODM machining according to slot width or samples is available.

Model:

Krantz lubricating plate

Series:

XTY-540 Vertical Krantz stenter parts

Size:

5×15×598 / 5×20×598 / 5×40×598 mm

Type:

Lubricating plate

Applicable machine:

Vertical pin stenter

Process:

Stentering, drying, heat setting