The UT pin plate (plated) is mounted on the vertical chain of UT stenter frames. The plate operates in an environment of high temperature, moisture, and short fibers and size dust released from the fabric, and its body is surface-treated by plating so that the face is smooth, adhered impurities can be wiped off and the tendency to rust is reduced. The pin row pierces the fabric selvedge and transmits the tension in the width direction to the chain. For maintenance, lint at the pin roots is removed with a soft brush after the machine has stopped and cooled, pin tip alignment is checked, and hard tools are not used to pry or scrape the plated face. When several pins of an individual plate are bent, the whole plate is replaced. Dimensions are subject to the physical part or drawing.
1. Plated face treatment: the face is smooth, and adhered impurities are easy to wipe off.
2. Corrosion resistance: the plating reduces the tendency to rust in the warm, humid oven environment.
3. Load transfer by the pin row: the tips pierce the selvedge and transmit width-direction tension to the chain.
4. Defined maintenance method: lint at the pin roots is cleared with a soft brush, and scraping the plated face with hard tools is prohibited.
5. Whole-plate replacement rule: a plate with several bent pins is replaced as a unit to keep the pin rows consistent.
6. Model correspondence: applicable to the vertical chain of UT stenter frames.
7. Custom supply: OEM/ODM production from samples is available, with pin row and plating requirements confirmed separately.
|
Series: |
XTY-590 UT-type series |
|
Name: |
Pin plate (plated) |
|
Applicable machine: |
UT Type Stenter |
|
Surface treatment: |
Plated |