The vertical UT chain belongs to the XTY-590 series and is intended for UT-type vertical chain stenter and heat-setting machines. It circulates along the guide rail and pulls the pin plates forward, and it is the core moving component of the equipment. The term vertical means that the chain is installed on edge in the rail, a structure that differs from the flat-lying type, so the machine is confirmed to be of the vertical type before replacement. The links are connected by pins, and wear of pins and bushings elongates the chain and enlarges the pitch, which shows as jerky running, uneven spacing of pin plates and unstable selvedge tension. The chain works in the high-temperature zone of the oven, and its lubrication and cleanliness influence the service interval. Link material and length are subject to the physical part or drawing.
1. Vertical installation: the chain is fitted on edge into the rail, unlike the flat-lying structure.
2. Core moving part: pulls all pin plates around the rail circuit.
3. Pin-bushing wear characteristics: wear lengthens the chain and enlarges the pitch.
4. High-temperature oven duty: the working zone is hot, so lubrication and cleanliness affect service life.
5. Series affiliation: part of the XTY-590 series for UT machines.
6. Custom length: OEM/ODM machining is supported, with length, link count and joint form defined from drawings.
|
Series: |
UT-type vertical series |
|
Name: |
Vertical chain |
|
Applicable machine: |
UT Type Vertical Chain Stenter |