• Wakayama chain

Wakayama chain

The Wakayama new-type chain is the endless chain of Wakayama-type stenter frames. It runs around the sprockets at both ends, and tenter clips or pin plates are fixed on it and travel along the guide rail. The structure of the new-type chain has been adjusted compared with the old type. A consistent pitch of all links is the precondition for synchronized running of the gripping points, and uneven pitch causes fluctuation of selvedge tension. The chain runs continuously in the oven, and high temperature together with repeated bending gradually wears the hinge areas, which appears as overall elongation of the chain. Chains should be replaced as a set, and new and old chains should not be mixed. The pitch and link specifications are subject to the physical part or drawing.

Send Inquiry
  • 01.Product Advantages
  • 02.Product Parameters
  • 03.Inquire Now

1. Structural adjustment: the new-type chain has an adjusted structure compared with the old type, and the type is distinguished in selection.
2. Uniform pitch: a consistent pitch keeps all gripping points synchronized and reduces selvedge tension fluctuation.
3. Operating condition: the chain runs continuously in the oven under high temperature and repeated bending.
4. Wear manifestation: wear of the hinge areas lengthens the whole chain, which is to be measured periodically.
5. Replacement method: chains are replaced as a set, and new and old chains are not mixed.
6. Customization: pitch and length can be discussed for OEM/ODM according to drawings, with specific conditions subject to negotiation.

Model:

Wakayama chain (new type)

Series:

Wakayama chain series

Type:

New type

Applicable machine:

Wakayama-type stenter

Process:

Stentering, drying, heat setting