The XTY-080 dual-purpose D-type aluminum clip is applied to Wakayama-type machines. The aluminum body provides two holding modes, namely selvedge clamping and pin holding. For woven fabrics the clip can be used with jaw clamping, and for knitted or elastic fabrics the pin function can be used to hold the selvedge, so that a clip of one specification adapts to changes of fabric type without replacing the whole row of clips. The low mass of aluminum reduces the load on the chain and rail when clips are installed in a row. D-type is the profile code, and XTY-080 is the model number of Jiangsu Xiaotaiyang. The installation dimensions and jaw specifications are subject to the physical part or drawing.
1. Dual-purpose function: both clamping and pin holding are provided.
2. Fabric changeover: a clip of one specification adapts to changeovers between woven, knitted and elastic fabrics.
3. Aluminum body: low mass reduces the load on the chain and rail.
4. Model identification: XTY-080 is the company model number, and D-type is the profile code.
5. Compatibility: the clip corresponds to Wakayama-type machines, and the installation dimensions and jaw specifications are to be verified.
6. Customization: OEM/ODM can be undertaken according to drawings or samples, with conditions subject to negotiation.
|
Model: |
XTY-080 |
|
Series: |
XTY-080 Wakayama-type clip series |
|
Type: |
Dual-purpose D type |
|
Material: |
Aluminum |
|
Surface treatment: |
Anodized |
|
Applicable machine: |
Wakayama-type stenter |
|
Process: |
Stentering, drying, heat setting |