The long-leg pin holder with protector is intended for Monforts-type pin stenter frames and is installed between the chain link and the pin plate, where it fixes and supports the pin plate. The long-leg structure keeps the pin plate at the specified working height and thereby determines the needle position relatⅣe to the fabric edge, while the protector covers the joint between the holder body and the pin plate and reduces the possibility of fly, sizing dust and oil entering the fitting clearance. The part is classified by leg length and by the presence of a protector, and long-leg and short-leg parts, or covered and uncovered parts, are not interchangeable; leg length and mounting hole spacing are to be verified when selecting. Pin holders are arranged in rows on the same chain and used together with the pin plates, and the type within one row is to be consistent. Dimensions and material are subject to the actual part or drawing.
1. Mounting position: located between the chain link and the pin plate, where it fixes and supports the pin plate.
2. Long-leg height: the extended leg places the pin plate at the specified working height.
3. Protector cover: the joint area is covered to reduce the entry of fly and sizing dust into the fitting clearance.
4. Type distinction: long-leg, short-leg, covered and uncovered types are not interchangeable and are configured by type.
5. Row configuration: the holders are used in rows together with pin plates, which allows a whole row to be inspected and replaced in step.
6. Machine compatibility: applicable to Monforts-type pin stenter frames.
7. Sample based customization: OEM/ODM development based on drawings or samples is possible, with conditions to be agreed separately.
|
Name: |
Long-leg pin holder with protector |
|
Applicable machine: |
Monforts-type stenter |
|
Position: |
Long leg |
|
Process: |
Pin-type stentering |