• Monforts short-leg pin holder

Monforts short-leg pin holder

The Monforts short-leg pin holder is an aluminum part composed of a holder body, a leg and mounting holes. It is fixed through the mounting holes to the links of the pin chain on Monforts-type tenter frames, and its upper portion carries the pin plate. The short leg corresponds to an installation in which the pin plate lies close to the chain link, and leg length determines the working height of the needle tips, so leg length within one row of holders is to be uniform. In operation the holder bears the reaction force of needle piercing, the tension of the fabric edge and the impact at chain turning. The aluminum body meets the load requirement while keeping the mass of each unit low, and since a chain carries a large number of holders, the accumulated mass imposed on guide rails and links is correspondingly reduced. After long exposure to heat and load, enlarged holes or a bent leg may occur and affect the position of the pin plate. Dimensions and hole spacing are subject to verification against the actual part.

Send Inquiry
  • 01.Product Advantages
  • 02.Product Parameters
  • 03.Inquire Now

1. Structural composition: the part consists of a body, a leg and mounting holes, with a simple structure and a defined connection method.
2. Aluminum body: low mass results in a small accumulated load over the whole chain.
3. Short-leg height: it corresponds to an installation close to the chain link, and the piercing position is set by leg length.
4. Support stability: the body bears the piercing reaction and the impact at chain turning and serves to hold the pin plate position.
5. IndⅣidual replacement: a damaged unit can be replaced singly without dismantling the whole chain.
6. Hole correspondence: the mounting hole spacing corresponds to Monforts-type pin plates and is to be verified when selecting.
7. Customization: OEM/ODM based on drawings or samples is available, with conditions subject to negotiation.

Name:

Short-leg pin holder

Applicable machine:

Monforts-type stenter

Material:

Aluminum

Position:

Short leg

Process:

Pin-type stentering