Home / Product / Stenter Machine Parts / XTY-30 Monforts Stenter Machine Parts / XTY-30 G5 Square graphite strip 9×13×200 (G5)
  • XTY-30 G5 Square graphite strip 9×13×200 (G5)
  • XTY-30 G5 Square graphite strip 9×13×200 (G5)

XTY-30 G5 Square graphite strip 9×13×200 (G5)

The XTY-30 G5 square graphite strip measures 9 × 13 × 200 mm with a rectangular cross-section and is designated as grade G5. It is inserted into the sliding groove of the guide rail of Monforts-series stenter frames and acts as the friction-reducing medium between the chain and the rail. Graphite has a layered crystal structure and is inherently self-lubricating, so no additional lubricating oil is required, which suits the dry-friction conditions in the high-temperature zones of the oven. The strip is a consumable part whose thickness decreases progressⅣely in service, accompanied by higher chain running resistance and friction noise. Thickness is determined by measurement against a new part, and replacement is carried out at the wear limit. The specific properties of grade G5 and the fit with the groove dimensions are subject to the physical part and supply documents.

Send Inquiry
  • 01.Product Advantages
  • 02.Product Parameters
  • 03.Inquire Now

1. Material characteristics: the layered structure of graphite provides self-lubrication and reduces friction between the chain and the rail.
2. Specification marking: rectangular cross-section of 9 × 13 × 200 mm, grade G5.
3. Oil-free operation: no dependence on lubricating oil, suitable for high-temperature dry-friction positions in the oven.
4. Consumable management: wear is judged by thickness measurement, and the strip is replaced as a whole at the limit.
5. Groove fit: cross-section and length are to be consistent with the dimensions of the original rail groove.
6. OEM/ODM support: graphite strips of other cross-sections and lengths can be produced from samples or drawings, with conditions to be agreed separately.

Model:

XTY-30

Part:

Square graphite strip

Grade:

G5

Size:

9×13×200

Series/Applicable machine:

Monforts-type stenter

Material:

Graphite

Position:

Guide rail slot

Process:

Stentering, drying, heat setting