The XTY-30 trapezoid graphite strip assembly measures 9 × 13 × 170 mm and consists of a graphite strip with a trapezoidal cross-section and the corresponding components. It is fitted into the trapezoidal groove of the guide rail of Monforts-series stenter frames. Unlike flat sections that rely on friction to remain in position, the trapezoidal section is located by its two inclined sides bearing against the groove walls, so the strip is less prone to axial displacement under the reciprocating pull of the chain. The graphite strip serves as the sliding surface and uses its inherent lubricity to reduce friction and wear between the chain and the rail. The parts included in the assembly are subject to the physical product, and installation requires a groove of trapezoidal section. The assembly is replaced as a whole when the wear limit is reached.
1. Trapezoidal section locating: the inclined sides bear against the groove walls and restrict displacement of the strip within the groove.
2. Assembly supply: supplied as an assembly that stays fixed once installed, with the exact composition subject to the physical product.
3. Self-lubricating sliding surface: graphite reduces friction and wear between the chain and the rail.
4. Specification: cross-section 9 × 13 mm, length 170 mm.
5. Groove type matching: applicable only to trapezoidal grooves and not interchangeable with strips for rectangular grooves.
6. Whole-part replacement: replaced as a complete unit at the wear limit, which simplifies assembly.
7. Customization: OEM/ODM production by reference to samples or drawings is available, with specifications and quantities to be agreed separately.
|
Model: |
XTY-30 |
|
Part: |
Trapezoid graphite strip assembly |
|
Size: |
9×13×170 |
|
Series/Applicable machine: |
Monforts-type stenter |
|
Material: |
Graphite |
|
Position: |
Guide rail slot |
|
Process: |
Stentering, drying, heat setting |